Effects of Toroidally Distributed Divertor Biasing on Scrape-Off-Layer Plasma in the QUEST Spherical Tokamak

Abstract

A novel divertor biasing using four biasing plates that are arranged toroidally every 90^◦ on the upper divertor plate is applied to low-density plasmas of the QUEST spherical tokamak. When some of these plates are biased in-phase by applying a sawtooth waveform voltage of 85-V amplitude and 50-Hz repetition, up to approximately 35% reduction of the particle flux to the divertor is observed during positive biasing. The input power for the flux reduction is approximately 0.2 kW for low-density tokamak plasmas produced by ∼130-kW electron cyclotron wave injection. Additionally, the signal of a plate probe placed in the low-field side of the mid-plane of the vacuum vessel indicates enhanced losses of fast electrons during positive biasing. The enhanced loss is attributed to small resonant magnetic perturbations produced by the bias-driven currents in the scrape-off layer. This novel divertor biasing is expected to provide a new experimental tool for studying divertor heat load control and fast electron confinement in a tokamak device.