Development of Impurity Influx Monitor (Divertor) for ITER

抄録

The optical design of Impurity Influx Monitor (divertor) was carried out for new ITER design and ray-tracing analysis shows that the spatial resolution of ITER requirement (50 mm) will be achieved by these optical systems designed here. The mechanical design of front end optics also carried out based on the optical design and results of port integration. In the upper port, front end optics can be installed inside the pipe of inner diameter of φ300 mm. In the equatorial port, all the optical component are placed to avoid the interaction with other diagnostic equipments. Heat analysis was carried out for the optimization the cooling method of mirrors, mirror holders and mounting modules to reduce the temperature rise caused by the nuclear heating. It indicates that mirrors can be cooled by the thermal conduction using mirror holders made of a copper alloy and making many cooling channels on the mounting module. Finally, the effect of the thermal deformation to the optical properties is estimated by using the optical design code.