2007 Volume 25 Issue 4 Pages 553-559
The present study applied Friction Spot Joining (FSJ), which was recently developed as a lap joining technique of Al alloys, to two sheets of Al alloy 6061, 1mm in thickness, and then examined the microstructural feature in the weld. The weld had the nugget-shaped stir zone around the exit hole of the probe, and the stir zone exhibited the equiaxed grain structure having finer grain size than that of the base material. The crystallographic texture analysis using electron backscattered diffraction method suggested that the material movement occurred along the rotating direction of the welding tool in the wide region including the stir zone. In the periphery of the nugget-shaped stir zone, which was characterized as region having the finer grain size than that of the stir zone interior, any inclusions and precipitates were not found in the SEM scale. The weld was softened around the weld center. The softening could be explained by dissolution and/or growth of the strengthening precipitates due to thermal cycle of FSJ.