溶接学会誌
Online ISSN : 1883-7204
Print ISSN : 0021-4787
ISSN-L : 0021-4787
TIG溶接用タングステン電極のアーク特性に関する研究(第2報)
安藤 弘平西川 淳
著者情報
ジャーナル フリー

1971 年 40 巻 6 号 p. 552-562

詳細
抄録

As to the consumption of tungsten electrode the following phenomena are observed.
The consumption of pure and thoriated tungsten shows a remarkable difference at arc starting as shown in Fig. 2. The explosive expansion of gas in intercrystal zone of sintered electrode is presumed as the main cause of the consumption at arc starting. Experiment shows the minimum consumption at 1.5% ThO2 content. Thoria acts to decrease the arc starting period of cold cathode state and at the same time acts to increase the number of sintered defects as shown in Fig. 3.
It is observed that the metal vapour in arc atmosphere little affects the consumption in stationary period, while iron particle spattered on the electrode acts to increase the consumption of electrode. Photo 5 shows a remarkable change of electrode shape when the electrode is contaminated by carbon vapour.
Oxygen and nitrogen affect also the consumption; the former decreases the surface tension and the latter produces gas holes in the molten electrode tip. See Photo XI .

著者関連情報
© 一般社団法人 溶接学会
前の記事 次の記事
feedback
Top