QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
Print ISSN : 0288-4771
Effect of Al in C-Mn Steels on Microstructure and Toughness of Submerged-Arc Weld Metal (Report 1)
Noboru NishiyamaHisaei TerashimaPHM Hart
Author information
JOURNALS FREE ACCESS

1984 Volume 2 Issue 3 Pages 533-539

Details
Abstract

To study the effect of Al in 50 kgf/mm2 class C-Mn-Nb steels on weld metal microstructure and toughness, single-pass, bead-in-groove tandem submerged-arc weld metals have been made at 49 kJ/cm. The work was based on a 1.5%Mn-0.5%Mo wire, with two kinds of highly basic agglomerated fluxes and one low basicity, flux. Semikilled, Si-killed and Si-killed, Al treated plates of 25 mm thickness were employed.
The preliminary findings presented in the report showed that even small changes in weld metal Si and Al levels (e.g. 0.02 to 0.03% Al) could produce drastic deterioration in Charpy toughness (up to 100 deg C shift in 3.5 kgf⋅m temperature) when using some basic fluxes. Furthermore, the results indicated that achievement of high weld metal toughness with some basic fluxes might be difficult in high dilution welding of Si-killed, Al-treated steels having more than about 0.035-0.045% Al. The effect of Al on microstructure and toughness was found to be independent of its source (wire or plate).

Information related to the author
© by JAPAN WELDING SOCIETY
Previous article Next article
feedback
Top