INSTALLATION TORQUE OF SCREW ANCHORS IN DRY SAND

抄録

The performance of single pitch and multi pitch screw anchors during the application of installation torque is presented. An experimental testing program was conducted using five models of screw anchors with different geometry. The effect of the shape of the screw element, sand properties, and installation depth on the required installation torque value was examined. A theoretical model was developed from which the required installation torque value can be calculated in terms of the influencing factors. The required installation torque can be determined in terms of the ultimate uplift resistance calculated from any of the available theories. Based on the actual installation torque value measured in the field, the anticipated pullout capacity can be back calculated from the present theory. A comparison between theoretical and experimental results showed good agreement. Also, good agreement was observed when the present theoretical results were compared with the available field results reported in the literature.