論文
薄鋼板調質圧延中に生じる縦バックルに及ぼす出側流出角の影響
2020 年 61 巻 708 号 p. 7-12
詳細
2020 年 61 巻 708 号 p. 7-12
In temper rolling of double reduced thin strips, shape defect called “longitudinal buckling” appears. In previous study, the effect of several rolling conditions on the longitudinal buckling was investigated. However, effect of delivery angle over 4 degree has not been experimented. In this paper, effect of large delivery angle is investigated in laboratory rolling. Results show that by increasing delivery angle, the buckling appears clearly and the number of waves decreases, and by the delivery angle over 24 degree the buckling disappears. If the delivery angle is the same, the buckling form does not change by the distance between work roll and auxiliary roll. Next we calculate the buckling characteristics of the sheet which twines around the work roll by the elementary theory. We find that the change of number of waves by the delivery angle calculated from the analysis almost agrees with the experimental result when the delivery angle is larger than 10 degree. It is estimated that the longitudinal buckling is initiated around roll gap and changes under the influence of the shape of sheet which twines around the work roll.
