鉄と鋼
Online ISSN : 1883-2954
Print ISSN : 0021-1575
ISSN-L : 0021-1575
論文
コイルばねクリープ試験法により評価した高Crフェライト系耐熱鋼の低応力クリープ変形
山﨑 重人光原 昌寿池田 賢一波多 聰中島 英治
著者情報
ジャーナル オープンアクセス HTML

2014 年 100 巻 5 号 p. 688-695

詳細
抄録

We measured a creep deformation in Grade T91 steel under low stress condition using a helicoid spring creep test method. By applying this method, we measured a very low strain rate creep deformation in a short time as there is no need to consider the contribution of the microstructural change to the creep deformation behavior. We distinguished magnitude of several types of time-dependent deformation, including viscoelastic deformation, which occurs during the creep test in order to evaluate a time-dependent plastic deformation in strain-time curves. This consideration derives a conclusion that the time-dependent plastic deformation occurs even in a short time and low stress condition. Moreover, we confirmed a strain rate of whole creep deformation is controlled by the strain rate of the time-dependent plastic deformation at the time of 270 ks in the creep test. We confirmed that though there are almost no changes in the microstructure of Grade T91 steel during creep tests, the susceptibility on strain rate to applied stress has changed depending on the applied stress region. In addition, activation energy of the creep deformation was also different in each stress region. From these results, we concluded that the dominant creep deformation mechanism is different in the low stress region and high stress region.

著者関連情報
© 2014 一般社団法人 日本鉄鋼協会

This article is licensed under a Creative Commons [Attribution-NonCommercial-NoDerivatives 4.0 International] license.
https://creativecommons.org/licenses/by-nc-nd/4.0/
前の記事 次の記事
feedback
Top