論文
離散要素法に基づくコークス混合装入の最適化
2017 年 103 巻 2 号 p. 86-92
詳細
2017 年 103 巻 2 号 p. 86-92
To achieve stable operation of high ratio coke mixed charging, it is important to control coke segregation behavior in mixed layer at blast furnace top. In this study, the effect of charging conditions and burden particle diameter of mixed coke ratio at blast furnace top were analyzed by numerical model based on discrete element method (DEM). Rolling friction coefficient was calibrated by experiment and calculation. Then, segregation behavior of coke particle was numerically investigated by using above calculation parameters. As a result, following findings were obtained.
1)At reverse tilting and broad range charging pattern of rotating chute, granular flow to the furnace center was interrupted and mixed coke particle was distributed uniformly for the direction of furnace radius.
2)Coke segregation in mixed layer was decreased by lowering particle diameter ratio between coke and sinter. Therefore, for the improvement of coke mixed ratio in mixed layer, control of particle diameter of coke and sinter is effective.
