2022 Volume 108 Issue 1 Pages 54-63
Dislocations are often introduced in Ni-based superalloys to impart sufficient strength at both room temperature and high temperatures prior to their use in automobile exhaust gaskets. However, the interaction between the representative γ′ (Ni3(Al, Ti))-phase precipitates and dislocations in high temperature remains unclear. Therefore, this study examined the effect of cold rolling on age-hardening behavior and microstructure evolution, focusing on the formation of γ′-phase Ni3Ti during aging at 700ºC for up to 400 h after 60% cold rolling of solution-treated specimens. During the early stage of aging, at 0.03 h, the hardness rapidly increased from 401 HV to 496 HV. Age-hardening continued until 3 h and reached its peak of 536 HV, followed by gradual decrease with aging time. 3D atom probe investigation revealed that the γ′-phase was confirmed after 0.3 h of aging. However, the composition-modulated structure speculated to be caused by spinodal decomposition was observed in the 0.03 h aged specimen. The change in strength with aging time was considered by calculating the contribution of each strengthening mechanism. In the initial stage of aging (0-3 h), dislocation and solid-solution strengthening dominated along with spinodal strengthening. Strengthening by spinodal decomposition in the 0.03 h aged specimen is presumptively accelerated by the introduced dislocations, which is followed by further precipitation strengthening caused by γ′-phase precipitates. In the later stage of aging (3-400 h), precipitation strengthening became dominant and reached its peak at 20 h aging, while dislocation strengthening decreased with aging time.