論文
相界面析出組織を有するTi,Mo添加低炭素鋼の引張変形挙動
キーワード:
low carbon steel,
interphase boundary precipitation,
precipitation strengthening,
work hardening,
ductility
2013 年 99 巻 5 号 p. 352-361
詳細
2013 年 99 巻 5 号 p. 352-361
Tensile behavior and structure-property relationship of ferritic steels with nano-sized carbide dispersion were invesigated using Ti-added steel and Ti,Mo-added low carbon steels. By austenitizing followed by isothermal heat treatment at 700°C, polygonal ferrites containing very fine carbides of TiC and (Ti,Mo) C were obtained in the Ti-added and the Ti,Mo-added steels, respectively. The size of such carbides was finer in the Ti,Mo-added steel than in the Ti-added steel at the same holding period of isothermal heat treatment. The results of tensile tests for these samples showed that the strength is higher as the diameter of the carbides is smaller. The structure-based strength calculation led to a good agreement with the experiments, when it was assumed that the Ashby-Orowan mechanism is dominant for precipitation strengthening of nano-sized alloy carbides. It was also suggested that a relatively large tensile ductility is related to enhanced recovery during the tensile deformation, accompanied with promotion of secondary slips or cross slips in a finer scale due to the nano-sized particles.
