鉄と鋼
Online ISSN : 1883-2954
Print ISSN : 0021-1575
ISSN-L : 0021-1575

この記事には本公開記事があります。本公開記事を参照してください。
引用する場合も本公開記事を引用してください。

局所ひずみに基づく繰返し軟化特性の異なる構造用鋼の疲労亀裂発生・伝播特性評価
米澤 隆行 羅 鵬軍堤 成一郎
著者情報
ジャーナル オープンアクセス 早期公開

論文ID: TETSU-2023-088

この記事には本公開記事があります。
詳細
抄録

In this paper, fatigue crack initiation and propagation properties of three structural steels with different static strength and cyclic softening behavior were evaluated and compared with the estimation results based on the local strain response. Steel C had the highest cyclic softening rate, which was 10 times that of steel A and twice that of steel B. The relationship between strain range and fatigue life in the fatigue life region shorter than 105 cycles was almost the same regardless of the test steels. The fatigue crack initiation life from the notch bottom of the SENT specimen was almost the same independent of static strength and cyclic softening rate. The crack initiation life estimated from the Strain range versus fatigue life equation using the local strain response measured by DIC was roughly in agreement with the experimental results. Steel C had the highest crack opening load and the slowest fatigue crack propagation rate compared to the other two steels. The local strain range at the fatigue crack tip showed a good correlation with the fatigue crack propagation rate irrespective of the steel grade. In addition, the estimates of fatigue crack propagation rate based on the local strain response were in almost agreement with the experimental results.

著者関連情報
© 2023 一般社団法人 日本鉄鋼協会

This article is licensed under a Creative Commons [Attribution-NonCommercial-NoDerivatives 4.0 International] license.
https://creativecommons.org/licenses/by-nc-nd/4.0/
feedback
Top