Tetsu-to-Hagane
Online ISSN : 1883-2954
Print ISSN : 0021-1575
ISSN-L : 0021-1575

This article has now been updated. Please use the final version.

Ductile Fracture Prediction During Metal Forming Using an Ellipsoidal Void Model and Some Other Models
Kazutake Komori
Author information
JOURNAL OPEN ACCESS Advance online publication

Article ID: TETSU-2024-033

Details
Abstract

This paper reviews studies on the prediction of ductile fracture during metal forming using an ellipsoidal void model and some other models proposed by the author and some relevant studies. Section 2 discusses the research on the theory of voids for predicting ductile fracture during metal forming. Section 3 summarizes the simulation method for predicting ductile fracture during metal forming using the ellipsoidal void model, and Section 4 summarizes the simulation result on the ductile fracture prediction during metal forming using the ellipsoidal void model. Section 5 shows the applicability of the ellipsoidal void model and the simulation result on the ductile fracture prediction during metal forming using some other models.

Content from these authors
© 2024 The Iron and Steel Institute of Japan

This article is licensed under a Creative Commons [Attribution-NonCommercial-NoDerivatives 4.0 International] license.
https://creativecommons.org/licenses/by-nc-nd/4.0/
feedback
Top