鉄と鋼
Online ISSN : 1883-2954
Print ISSN : 0021-1575
ISSN-L : 0021-1575
固体石灰による熔銑の脱硫速度におよぼす諸因子の影響
八木 貞之助小野 陽一
著者情報
ジャーナル フリー

1959 年 45 巻 11 号 p. 1236-1241

詳細
抄録

Effects of various factors on the rate of desulfurization of molten pig iron with solid lime were studied with the following results:
1) Desulfurization hardly proceeded in the oxidizing atmosphere consisting of argon and carbon dioxide or carbon monoxide and carbon dioxide.
2) The desulfurization reaction of molten Fe-C-S alloy in a neutral or a reducing atmosphere was found to be of the 1st order with respect to the sulfur content of iron at the very beginning of the reaction.
3) The rate of desulfurization in the atmosphere of Ar was equal to that in CO. The rate in town gas was 3 times as much as others.
4) Contact surface between lime and molten iron has remarkable effects on the rate of desulfurization. To attain effective desulfurization the lime should be finely pulverized and large contact surface relative to the mass of iron should be given.
5) The rate of desulfurization increased with increasing temperature. The relationship of the rate to temperature could be expressed with the so-called Arrhenius' equation.
6) The rate of desulfurization was increased with increasing Si content of iron. In case when iron contained silicon, the reaction was found not to be of the 1st order. The effect of Si content was increased as the reaction proceeds.

著者関連情報
© 一般社団法人 日本鉄鋼協会
前の記事 次の記事
feedback
Top