鉄と鋼
Online ISSN : 1883-2954
Print ISSN : 0021-1575
ISSN-L : 0021-1575
正則溶液モデルに基礎を置く2乗形式による溶融珪酸塩系スラグのハイドロキシル・キャパシティの推算
萬谷 志郎日野 光兀長坂 徹也
著者情報
ジャーナル オープンアクセス

1993 年 79 巻 1 号 p. 26-33

詳細
抄録
An attempt has been made to estimate the hydroxyl capacities of some molten silicates by the regular solution model of Lumsden, which has been extensively developed to be applied to slag-metal reactions in steelmaking process by the authors. The slag systems discussed were of Na2O-SiO2, K2O-SiO2, Li2O-SiO2, CaO-SiO2 binaries and CaO-SiO2 -Al2O3, CaO-SiO2-MgO, CaO-SiO2-MnO and CaO-SiO2-P2O5 ternaries. In the present work, it was assumed that the water vapor is dissolved in the slag as HO0.5, and the hydroxyl capacity is redefined as C'OH=XHO0.5/(PH2O/P0)1/2, where, PH2O, P0 are partial pressure of water vapor in the gas phase and the atmospheric pressure(Pa), respectively. The interaction energies between hydrogen ion and cation i, αH-ihave been derived based on the regular solution model in the present work. As the result, it has been confirmed that the model has been applicable to predict the hydroxyl capacities over the wide range of slag composition discussed. It has been found that COH calculated by the model showed the minimum value at the slag composition of about unit basicity. The hydroxyl capacities calculated by the model have agreed with the measured within ± 0.002.
著者関連情報
© 一般社団法人 日本鉄鋼協会

This article is licensed under a Creative Commons [Attribution-NonCommercial-NoDerivatives 4.0 International] license.
https://creativecommons.org/licenses/by-nc-nd/4.0/
前の記事 次の記事
feedback
Top