鉄と鋼
Online ISSN : 1883-2954
Print ISSN : 0021-1575
ISSN-L : 0021-1575
アルミナグラファイト浸漬ノズルと低炭素鋼の反応速度
笹井 勝浩水上 義正
著者情報
ジャーナル オープンアクセス

1994 年 80 巻 5 号 p. 395-400

詳細
抄録
A kinetic study has been made on reactions between the alumina graphite refractory containing SiO2 and molten steel by measuring mass losses of the refractories heated at 1100-1600°C and Si contents of molten steel immersing the refractories in at 1600°C.
The results are summarized as follows.
1) Rate of reaction in the refractory, namely carbothermic reduction rate of SiO2, is controlled by the diffusion of SiO and CO gases through refractory pores.
2) Rate of reaction between the refractory and molten steel is controlled by the diffusion of SiO and CO gases through oxide layer formed at refractory-molten steel interface.
3) Rate of reaction between the refractory and Ti killed steel is higher than that of reaction between the refractory and Al killed steel. This is because gas permeability of oxide layer formed at refractory-Ti killed steel interface is higher than that at refractory-Al killed steel interface.
著者関連情報
© 一般社団法人 日本鉄鋼協会

This article is licensed under a Creative Commons [Attribution-NonCommercial-NoDerivatives 4.0 International] license.
https://creativecommons.org/licenses/by-nc-nd/4.0/
前の記事 次の記事
feedback
Top