鉄と鋼
Online ISSN : 1883-2954
Print ISSN : 0021-1575
ISSN-L : 0021-1575
Fe-36%Ni合金の機械的性質に及ぼす合金元素の影響
津田 正臣王 昆
著者情報
ジャーナル オープンアクセス

1996 年 82 巻 8 号 p. 701-706

詳細
抄録
The effect of single addition (C, B<0.041%, others<2.0%) of various minor alloying elements such as C, Si, Mn, Ni, Cr, Co, Nb, Ti, V, Zr, and B in the Fe-36%Ni alloy on the mechanical properties, especially 0.2%proof stress and Young's modulus, was investigated. The results obtained are as follows:
(1) Cr is the only element which decreases the 0.2% proof stress in the Fe-36%Ni alloys.
(2) There is a good relation between the magnitude of the effects of alloying elements on the proof stress and the radius of atoms of alloying elements.
(3) The addition of C, Si, Ni, Co decreases the Young's modulus, while the addition Mn, Cr, Nb, Ti, Zr, B increases it. The effect of such alloying elements except B on the Young's modulus can be classified by the period and group in the periodic table.
(4) From the view of the number of valence electrons and the texture, the origin of the effect of alloying elements on the Young's modulus has been discussed.
著者関連情報
© 一般社団法人 日本鉄鋼協会

This article is licensed under a Creative Commons [Attribution-NonCommercial-NoDerivatives 4.0 International] license.
https://creativecommons.org/licenses/by-nc-nd/4.0/
前の記事 次の記事
feedback
Top