Hough Transform-Based Clock Skew Measurement by Dynamically Locating the Region of Offset Majority

抄録

A network-based remote host clock skew measurement involves collecting the offsets, the differences between sending and receiving times, of packets from the host within a period of time. Although the variant and immeasurable delay in each packet prevents the measurer from getting the real clock offset, the local minimum delays and the majority of delays delineate the clock offset shifts, and are used by existing approaches to estimate the skew. However, events during skew measurement like time synchronization and rerouting caused by switching network interface or base transceiver station may break the trend into multi-segment patterns. Although the skew in each segment is theoretically of the same value, the skew derived from the whole offset-set usually differs with an error of unpredictable scale. In this work, a method called dynamic region of offset majority locating (DROML) is developed to detect multi-segment cases, and to precisely estimate the skew. DROML is designed to work in real-time, and it uses a modified version of the HT-based method [8] both to measure the skew of one segment and to detect the break between adjacent segments. In the evaluation section, the modified HT-based method is compared with the original method and with a linear programming algorithm (LPA) on accumulated-time and short-term measurement. The fluctuation of the modified method in the short-term experiment is 0.6 ppm (parts per million), which is obviously less than the 1.23 ppm and 1.45 ppm from the other two methods. DROML, when estimating a four-segment case, is able to output a skew of only 0.22 ppm error, compared with the result of the normal case.