Analysis by energy transmissibility using a simplified model considering idling vibration and engine shake

Abstract

In automotive development, it is important to balance various phenomena with a simplified vehicle body model in the initial design phase. Additionally, idling vibration, engine shake, and road noise are phenomena that affect vehicle ride comfort. Since they have different exciting components and target frequencies, each simplified vehicle model examined in the past report is different. Therefore, it is necessary to represent of each phenomenon in a single vehicle model. Therefore, in recent years, much research has been done in initial design techniques called Model Based Development (MBD) and 1D CAE. We have studied using the Statistical Energy Analysis (SEA) for the initial design. Especially an energy transmissibility parameter of SEA which is called by coupling loss factor (CLF) is focused on describing the phenomenon for various kinds of vibration and noise problem. In this paper, a fundamental study is conducted to examine the balance of multiple phenomena in the initial design phase by the energy transmissibility. At first, a simplified vehicle model that represents each phenomenon is constructed. Next, the energy transmissibility is used to represent each phenomenon, and vibration reduction guidelines are obtained and verified through balance design. The obtained guidelines are then applied numerically to the actual vehicle to confirm vibration reduction.