The Proceedings of Conference of Kyushu Branch

Online ISSN : 2424-2780

Browse

Search
Browse

All issues

Current issue

Displaying 101-124 of 124 articles from this issue

Download citation

Show all abstracts

Proposal of a Robust design based total error minimization method.

Hiroaki Ito, Sin-ichi Inage

Session ID: E41
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.E41

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (906K)
Modelling Method for Bolted Joint with Long Slotted Hole Using Shell and Beam Element

Takashi MIYANAGA, Takeshi KAWASAKI, Hideyuki NAKAMURA, Kento NAGAOKA, ...

Session ID: E42
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.E42

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Show abstractHide abstract

In order to accurately predict the stress distribution on aluminum-alloy plates with a slotted hole for each through which the plates are fastened by a steel bolt, we applied a spider model which is the Finite Element Method composed of shell and beam elements. As a result, the analysis of the model can be accurately predicted trend of stresses without showing abnormally high stress near fastening section.

View full abstract

Download PDF (416K)
Development of an Algorithm to estimate a Governing Equation from time series data

Shoki Ogi, Hayato Mizuguchi, Sin-ichi inage

Session ID: E43
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.E43

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (2196K)
Two-Dimensional Analysis of Conductive Fluid Sloshing Under Direct-Current Magnetic Fields

Kenta SHIBUTA, Haruhiko KOHNO

Session ID: E44
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.E44

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (675K)
Proposal of a short-term prediction model for COVID-19 infected persons using time-series data

Hana HEBISHIMA, Shin-ichi INAGE

Session ID: E45
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.E45

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (1423K)
Development of Distance Learning Teaching Materials for Mechanical Engineering Training Subjects using VR / AR Technology

Ryo YASUKAWA, Yoshihumi OHBUCHI, Kimihide Tsukamoto

Session ID: F11
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.F11

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (1007K)
Reproduction and Engineering Evaluation of Traditional Craft by 3D Model

- Stable Form Reproduction by Structural Analysis of Japanese Folding Fan -

Shoji WATASAKI, Yoshihumi OHBUCHI

Session ID: F12
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.F12

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (801K)
Shape optimization of spar buoy type wave energy converter

Takeshi KASAI, Yasutaka IMAI

Session ID: F13
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.F13

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (778K)
On Surface Pressure of a Hydrofoil under Cavitation Condition:

(Influence of Gas Content and Bubble Nuclei Density)

Daiki TSUJI, Yasuhiro MATSUURA, Satoshi WATANABE, Shinichi TSUDA

Session ID: F21
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.F21

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (1799K)
Study on structure of supersonic microjets

Ryota FUKUNAGA, Shinichiro NAKAO, Yoshiaki MIYAZATO, Yojiro ISHINO

Session ID: F22
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.F22

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (681K)
Study on underexpanded sonic jets from square convergent nozzles

Tatsuya SAKANASHI, Shinichiro NAKAO, Yoshiaki MIYAZATO

Session ID: F23
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.F23

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (366K)
Study on oscillatory characteristics of shock waves in transonic diffusers

Taiju NAKA, Shinichiro NAKAO, Yoshiaki MIYAZATO

Session ID: F24
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.F24

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (813K)
Evaluation of the Optimum Condition to Maximize Power Output of Twin Rotors Cross Flow Wind Turbines

Ippei YOSHIDA, Jin KUBOTA, Kazuto SASAKI, Yoichi ANDO

Session ID: F25
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.F25

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (1452K)
Improvement in compressive strength of oyster shell powder - clay sintered material by resin coating

Satoshi TAMURA, Kazumasa TANIMOTO

Session ID: F31
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.F31

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (917K)
Heat and mass transfer of waste gypsum powder in a closed rotating container by external heating

Hideo KAWAHARA, Lontsi Crisko Jele Crisko, Koichiro OGATA, Hiroaki SAN ...

Session ID: F32
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.F32

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (951K)
Research and Development of Visualization System for Wax Fuel Regression Rate under Acceleration Environments

Haruka NAGASAKA, Kohei OZAWA, Nobuyuki TSUBOI, Daisuke NAKATA

Session ID: F33
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.F33

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (775K)
A simple method for creating micro structured surfaces through mechanical removal process

Hajime YAMAGUCHI, AL HYYI HADI, Koshi SAKATA, Keiji KASAMURA, Yuta NAK ...

Session ID: F34
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.F34

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (570K)
Three-dimensional Shape Measurement using Non-contact Line Laser Probe

(Relationship between surface roughness and reflectivity that can cause excessive detection error)

Masanori KAJIKI, Syuhei KUROKAWA, Terutake HAYASHI, Kuniharu YAMAMOTO

Session ID: F41
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.F41

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (1002K)
Nanoparticle sizing by using fluorescence probe

-Evaluation of solvent viscosity by measurement of translational and rotational diffusion coefficients by polarized FCS-

Tomohiro HIRANO, Terutake HAYASHI, Syuhei KUROKAWA

Session ID: F42
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.F42

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (612K)
P-CVM / CMP fusion processing of CVD polycrystalline SiC with ELID grinding for preprocessing

Shuhei OKOGE, Syuhei KUROKAWA, Terutake HAYASHI, Akihiro ORI, Hitoshi ...

Session ID: F43
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.F43

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (907K)
Femtosecond Laser Processing for Semiconductor Substrate using Double Pulse Beam (2nd report)

~ Multi Shot Processing for Fused Silica~

Ryosuke MIZUMACHI, Terutake HAYASHI, Syuhei KUROKAWA, Moe MURAKAMI, Ma ...

Session ID: F44
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.F44

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (501K)
Solid hobbing by ultra-high speed cutting

-Properties of gears in the cutting region with cutting speeds exceeding 2000 m/min -

Manami GOTO, Syuhei KUROKAWA, Terutake HAYASHI, Yoji MATSUKAWA, Takesh ...

Session ID: F45
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.F45

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (605K)
Effect of NC System Functions on Profile Contouring of Machining Center

Hua QIU, Yinji ZHOU, Tetsurou YAMAGUCHI, Yongan HUANG

Session ID: F46
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.F46

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (1986K)
Surface texturing on rotating shaft for sliding surface against seal lip for waterproof

Takuro HONDA, Katsunori HIGUCHI, Haruki MIYAMOTO, Yoshitaka NAKANISHI

Session ID: F47
Published: 2021
Released on J-STAGE: September 25, 2021

DOIhttps://doi.org/10.1299/jsmekyushu.2021.74.F47

CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Download PDF (672K)

feedback

Top

Register with J-STAGE for free!