年次大会講演論文集

S1402-1-4 リレー等の接点端子圧入組立における端子倒れ量安定化検討([S1402-1] S1402生産システムの新展開(応用・実践1))

水野真治, 生駒学

原稿種別: 本文
セッションID: S1402-1-4
発行日: 2010/09/04
公開日: 2017/08/01

DOIhttps://doi.org/10.1299/jsmemecjo.2010.4.0_291

会議録・要旨集認証あり

抄録を表示する抄録を非表示にする

In the assembly that terminals such as relays and switches are press-fit, it is important to dimensional stability and a holding force after assembly of the terminal. However, due to plastic deformation at press-fit, the position of the terminal fluctuates in the press fit assembly of the terminal. Therefore, there are concern about degradation of product quality such as operating characteristics and contact reliability of contact point. In this study, concerning the press-fitting assembly of contact terminal for relay, our aim is to satisfy contradictory characteristic value which is the position and the holding force of terminal. Based on the results of parametric design for real sample, we tried to correct the level of significant factors affecting holding force, discussed those results.

抄録全体を表示

PDF形式でダウンロード (411K)
S1402-1-5 故障ゼロのものづくりについての一考察(その1) : Recall-Free-Production([S1402-1] S1402生産システムの新展開(応用・実践1))

河内淳

原稿種別: 本文
セッションID: S1402-1-5
発行日: 2010/09/04
公開日: 2017/08/01

DOIhttps://doi.org/10.1299/jsmemecjo.2010.4.0_293

会議録・要旨集認証あり

抄録を表示する抄録を非表示にする

Recall issue of automobiles is one of the biggest topics in the world today. We discuss an essential question; whether we can make recall-free production or not. It was found out that some pieces of the information of properties of products, whose information is much more than that of design drawings, are 'INVISIBLE'. This 'INVISIBLE' information causes recalls. The key to realize recall-free production is to control the 'INVISIBLE information.

抄録全体を表示

PDF形式でダウンロード (349K)
S1402-1-6 LCC(ローコストカントリー)向け生産システムの開発([S1402-1] S1402生産システムの新展開(応用・実践1))

中村寿幸

原稿種別: 本文
セッションID: S1402-1-6
発行日: 2010/09/04
公開日: 2017/08/01

DOIhttps://doi.org/10.1299/jsmemecjo.2010.4.0_295

会議録・要旨集認証あり

抄録を表示する抄録を非表示にする

In recent years, the ratio of LCC (Low Cost Countries) production is increasing more and more in manufacturing industry. In LCC production, automated machine is few and operator have bigger role to play than advanced country. However, the ability difference between operators is large. To achieve high productivity and quality, the role allotment between production machine and operator is very important in this condition. And, the production machine should be equipment matched to LCC manufacturing. At this time, I introduce test machine which is very important equipment to achieve high quality by an example.

抄録全体を表示

PDF形式でダウンロード (396K)
S1402-2-1 環境を配慮したロジスティクス設計問題の階層的最適化([S1402-2]生産システムの新展開(応用・実践2))

竹村孝司, 土屋翔太, 清水良明

原稿種別: 本文
セッションID: S1402-2-1
発行日: 2010/09/04
公開日: 2017/08/01

DOIhttps://doi.org/10.1299/jsmemecjo.2010.4.0_297

会議録・要旨集認証あり

抄録を表示する抄録を非表示にする

Concerning with a green logistics optimization problem under reliability consideration, we have engaged in multi-objective analysis by developing an extended method of hybrid tabu search. It is a hierarchical method composed of tabu search and graph algorithms for solving the minimum cost flow problem. Through numerical experiments, we have verified the effectiveness of the proposed procedure and claimed the significance of the multi-objective anarysis for green logistics network design.

抄録全体を表示

PDF形式でダウンロード (339K)
S1402-2-2 環境負荷を考慮した工程比較の試み([S1402-2]生産システムの新展開(応用・実践2))

成田浩久

原稿種別: 本文
セッションID: S1402-2-2
発行日: 2010/09/04
公開日: 2017/08/01

DOIhttps://doi.org/10.1299/jsmemecjo.2010.4.0_299

会議録・要旨集認証あり

抄録を表示する抄録を非表示にする

Manufacturing technologies is required to reduce environmental burden, recently. Hence, an environmental burden analyzer for machine tool operations has been developed so far. By using the developed system, some manufacturing process is compared with consideration of the environmental burden, productivity and machining accuracy in this report. An importance of the manufacturing process comparisons with consideration of the environmental burden is introduced.

抄録全体を表示

PDF形式でダウンロード (340K)
S1402-2-3 生産システム設計支援システムに関する研究 : 新規設計時と改良設計時における支援システムの機能の相違に関する検討([S1402-2]生産システムの新展開(応用・実践2))

小池稔, 若松栄史, 森永英二, 荒井栄司

原稿種別: 本文
セッションID: S1402-2-3
発行日: 2010/09/04
公開日: 2017/08/01

DOIhttps://doi.org/10.1299/jsmemecjo.2010.4.0_301

会議録・要旨集認証あり

抄録を表示する抄録を非表示にする

Diversifying the customers' needs, new manufacturing systems and new manufacturing management methods are proposed. But they are not introduced into the factories in real. In this paper we discuss the reasons that the newly proposed systems and methods are not used in the factories. And we discuss that "Design Support System for Manufacturing Systems (DSSMS) " is necessary for the introduction of the new systems and methods. On this report we discuss the functions that the Design Support System for Manufacturing Systems has to have. And we discuss the functional similarity and difference of the support system between the new design of manufacturing systems and the improvement design.

抄録全体を表示

PDF形式でダウンロード (298K)
S1402-2-4 知識の階層化による実時間制御用知識ベース・システムに関する研究([S1402-2]生産システムの新展開(応用・実践2))

岸本創, 高田昌之

原稿種別: 本文
セッションID: S1402-2-4
発行日: 2010/09/04
公開日: 2017/08/01

DOIhttps://doi.org/10.1299/jsmemecjo.2010.4.0_303

会議録・要旨集認証あり

抄録を表示する抄録を非表示にする

This study proposes an inference system based on the hierarchization of meta knowledge to control the inference process in solving real-time control problems when urgent plan corrections are needed after the production plan is scheduled. The hierarchy according to the meta level of knowledge is achieved as a multiagent system that provides knowledge at different respective meta levels to multiple agents. The agent located in the higher level hierarchy controls the inference process of the subordinate agents, and the subordinate agents infers solution with the knowledge controlled by the higher level hierarchy.

抄録全体を表示

PDF形式でダウンロード (331K)
奥付

原稿種別: 付録等
p. App4-
発行日: 2010/09/04
公開日: 2017/08/01

DOIhttps://doi.org/10.1299/jsmemecjo.2010.4.0_App4

会議録・要旨集認証あり

PDF形式でダウンロード (20K)

J-STAGEへの登録はこちら（無料）