Hybrid storage techniques are useful methods to improve the cost performance for input-output (IO) intensive workloads. These techniques choose areas of concentrated IO accesses and migrate them to an upper tier to extract as much performance as possible through greater use of upper tier areas. Automated tiered storage with fast memory and slow flash storage (ATSMF) is a hybrid storage system situated between non-volatile memories (NVMs) and solid-state drives (SSDs). ATSMF aims to reduce the average response time for IO accesses by migrating areas of concentrated IO access from an SSD to an NVM. When a concentrated IO access finishes, the system migrates these areas from the NVM back to the SSD. Unfortunately, the published ATSMF implementation temporarily consumes much NVM capacity upon migrating concentrated IO access areas to NVM, because its algorithm executes NVM migration with high priority. As a result, it often delays evicting areas in which IO concentrations have ended to the SSD. Therefore, to reduce the consumption of NVM while maintaining the average response time, we developed new techniques for making ATSMF more practical. The first is a queue handling technique based on the number of IO accesses for NVM migration and eviction. The second is an eviction method that selects only write-accessed partial regions in finished areas. The third is a technique for variable eviction timing to balance the NVM consumption and average response time. Experimental results indicate that the average response times of the proposed ATSMF are almost the same as those of the published ATSMF, while the NVM consumption is three times lower in best case.

抄録全体を表示

ITER is a long-pulse tokamak with elongated plasma. The nominal inductive operation produces a D-T fusion power of 500 MW for a burn length of 300-500 s, with the injection of 50 MW of auxiliary power. With non-inductive current drive from the H&CD systems, the burn duration is envisaged to be extended to 3000 s. The term ITER Instrumentation & Control (I&C) includes every thing required to operate the ITER facility. It comprises three vertical tiers; conventional control, interlock system and safety system, and two horizontal layers; central I&C systems and plant system I&C. CODAC (Control, Data Access and Communication) system forms the upper level of the hierarchy, and is the conventional central control system of ITER architecture. CODAC system is responsible for integrating all plant system I&C and enable operation of ITER as a single integrated plant. CODAC system provides overall plant systems coordination, supervision, plant status monitoring, alarm handling, data archiving, plant visualization (HMI) and remote experiment functions. CIS (Central Interlock System) and CSS (Central Safety System) also form the upper level of the hierarchy to supervising and integrating all plant system interlock and safety functions. Plant system I&C forms the lower level of the hierarchy, and provide dedicated plant data acquisition, plant status monitoring, plant control and plant protection functions to perform individual plant system operation under the supervision of central I&C systems.

抄録全体を表示

The response times of solid state drives (SSDs) have decreased dramatically due to the growing use of non-volatile memory express (NVMe) devices. Such devices have response times of less than 100 micro seconds on average. The response times of all-flash-array systems have also decreased dramatically through the use of NVMe SSDs. However, there are applications, particularly virtual desktop infrastructure and in-memory database systems, that require storage systems with even shorter response times. Their workloads tend to contain many input-output (IO) concentrations, which are aggregations of IO accesses. They target narrow regions of the storage volume and can continue for up to an hour. These narrow regions occupy a few percent of the logical unit number capacity, are the target of most IO accesses, and appear at unpredictable logical block addresses. To drastically reduce the response times for such workloads, we developed an automated tiered storage system called “automated tiered storage with fast memory and slow flash storage” (ATSMF) in which the data in targeted regions are migrated between storage devices depending on the predicted remaining duration of the concentration. The assumed environment is a server with non-volatile memory and directly attached SSDs, with the user applications executed on the server as this reduces the average response time. Our system predicts the effect of migration by using the previously monitored values of the increase in response time during migration and the change in response time after migration. These values are consistent for each type of workload if the system is built using both non-volatile memory and SSDs. In particular, the system predicts the remaining duration of an IO concentration, calculates the expected response-time increase during migration and the expected response-time decrease after migration, and migrates the data in the targeted regions if the sum of response-time decrease after migration exceeds the sum of response-time increase during migration. Experimental results indicate that ATSMF is at least 20% faster than flash storage only and that its memory access ratio is more than 50%.

抄録全体を表示

Indexing is one of the fields where the non-volatile memory (NVM) has the advantages of byte-addressable characteristics and fast read/write speed. The existing index structures for NVM have been developed based on the fact that the size of cache line and the atomicity guarantee unit of NVM are different and they tried to overcome the weakness of consistency from the difference. To overcome the weakness, an expensive flush operation is required which results in a lower performance than a basic B+tree index. Recent studies have shown that the I/O units of the NVM can be matched with the atomicity guarantee units under limited circumstances. In this paper, we propose a Cache line sized Atomic Write B+tree (CAWBT), which is a minimal B+tree structure that shows higher performance than a basic b+ tree and designed for NVM. CAWBT has almost same performance compared to basic B+tree without consistency guarantee and shows remarkable performance improvement compared to other B+tree indexes for NVM.

抄録全体を表示

File systems based on persistent memory deploy Copy-on-Write (COW) or logging to guarantee data consistency. However, COW has a write amplification problem and logging has a double write problem. Both COW and logging increase write traffic on persistent memory. In this work, we present adaptive differential logging and zero-copy logging for persistent memory. Adaptive differential logging applies COW or logging selectively to each block. If the updated size of a block is smaller than or equal to half of the block size, we apply logging to the block. If the updated size of a block is larger than half of the block size, we apply COW to the block. Zero-copy logging treats an user buffer on persistent memory as a redo log. Zero-copy logging does not incur any additional data copy. We implement adaptive differential logging and zero-copy logging on both NOVA and PMFS file systems. Our measurement on real workloads shows that adaptive differential logging and zero-copy logging get 150.6% and 149.2% performance improvement over COW, respectively.

抄録全体を表示