Effect of PMMA filler particles addition on the physical properties of resin composite

抄録

The aim of this study was to evaluate the effect of additional polymethyl methacrylate (PMMA) fillers on the physical properties of experimental resin composites. PMMA particles (d=30 μm) were added to an experimental methacrylate-based resin composite in five concentrations of 0, 2.0, 4.8, 9.1, and 23.1 wt%. Properties such as contact angle, water sorption and compressive strength were measured and the fractured specimens were observed with a scanning electron microscope. The results showed that a small amount (2 wt%) of additional PMMA fillers inhibited the crack propagation and enhanced compressive strengths of the resin composites, without a significant change in water contact angle of surface or increased water sorption. However, in higher portions, the mechanical properties were not improved as a debonding at the interface between untreated fillers and the matrix, or failure within the organic filler could reduce the compressive yield strength of the composite.