グランド再生可能エネルギー国際会議論文集
Online ISSN : 2434-0871
Japan council for Renewable Energy(2018)
会議情報

MICRO-SCALE CHARACTERIZATION OF PERC UNDER THE MANUFACTURING PROCESS BY PHOTO-LUMINESCENCE
*Kazumi TakanoMasaru YamashitaKatsuhiko ShirasawaHidetaka Takato
著者情報
会議録・要旨集 フリー

p. 56-

詳細
抄録
The passivated emitter and rear cells (PERC) have micro-scale structure on rear side. The micro photo luminescence (PL) is suitable to analyze PERC in a non-destructive. In the case of the objective lens (x5) with microscope and 1 Mega pixel camera, calculated pixel resolution is 2.6μm. Micro-PL results of the passivation layer after Laser contact hole opening (LCO) process shows that passivation region quality is affected up to about 400μm away from the border of the laser contact opening. And micro-PL shows that the PL intensity at local back surface field (BSF) region correlates well with the thickness of BSF layer measured from the cross section of solar cell.
著者関連情報
© 2018 Japan Council for Renewable Energy (JCRE)
前の記事 次の記事
feedback
Top