電気学会論文誌A(基礎・材料・共通部門誌)
Online ISSN : 1347-5533
Print ISSN : 0385-4205
ISSN-L : 0385-4205
論文
銅プリント配線板におけるWDT法による短絡電流とデンドライトの三次元形状の関係
唐 超水戸部 一孝吉村 昇
著者情報
ジャーナル フリー

2003 年 123 巻 9 号 p. 932-938

詳細
抄録
In this paper, the 3-dimensional form of the dendrite generated by the WTD method was measured using the 3-dimensional form measurement system. We had also investigated about a change of the short-circuit current while changing protection resistance and the dendrite with the passage of time. Consequently, after failure, in nonuniform electric field electrode it turns out that there is more accumulation thing at the anode than the cathode. In uniform electric field, if the maximum current is less than 0.1[mA], then the accumulate thing at cathode. If the maximum current is more than 0.1[mA], then the amount of accumulation at anode is larger than of cathode. The amount of generating per unit electric charge and the protection resistance holds a linear relation. The volume of the accumulation thing per unit electric charge grows larger with the increase of protection resistance. But it decreases if the time after failure becomes longer. For a same protection resistance, it turns out that the amount of generating per unit electric charge is smaller in nonuniform electric field than the uniform electric field. The current at the field strength differs form the failure current. And the action state of the accumulation thing after failure varies with the protection resistance, the failure time is shorter in the large environment. We also consider the progress speed of the accumulation thing after failure is faster. We think that this point is important to design a circuit pattern and a circuit.
著者関連情報
© 電気学会 2003
前の記事 次の記事
feedback
Top