Fundamental Study for Assessment of Surface Resistivity Based on Waveform Characteristics of Partial Discharge

Abstract

The partial discharge (PD) waveform reflects the evolution process of electron avalanche in the discharge space. The authors expect to estimate the condition of the discharge space based on the PD waveform characteristics. The semi-conductive sheet was attached to the insulator to simulate the decrease in surface resistance due to deterioration. With the reduction of the surface resistivity, the shoulder appeared on the rising part of the PD waveform and the rise time of the PD waveform became longer. In addition, we simulated the change in the rise time using an equivalent circuit model. The displacement current was calculated from the surface potential distribution estimated by the diffusion equation, and the PD current was simulated by summing up all the current components. As a result, the shoulder was reproduced at the rising part of the PD waveform in the simulation as well. The surface resistance was estimated from the PD waveform by fitting with the experimental results.