Abstract
The generation mechanism of the jumping and dropping phenomena, which appears when the ceramic resonator with high-Q is driven by the resonance frequency, has not been revealed.
This papaer proposes the model of the jumping and dropping phenomena and its hysteresis which occurs on the ceramic resonator. The generation mechanism of these phenomena is cleared comparing the analysis of the model and the mechanical resonance curve. The generation mechanism of these phenomena is described using the proposed model which is formed by the two types of resonance curves existing in each territory of the linear and the non-linear.
The results of the examination of this model are in good agreement with the experimental value. It shows that the propsed model is correct.
