電気学会論文誌A(基礎・材料・共通部門誌)
Online ISSN : 1347-5533
Print ISSN : 0385-4205
ISSN-L : 0385-4205
Pr-Fe-Co-Nb-B系交換スプリング磁石の磁気特性
山元 洋小西 俊宏
著者情報
ジャーナル フリー

2001 年 121 巻 8 号 p. 784-789

詳細
抄録
The amorphous melt-spun ribbons of Pr-Fe-Co-Nb-B system alloys were prepared by single roller rapid-quenching method. The effect of composition, wheel velocity and heat-treatment on the magnetic properties were investigated. The amorphous Pr9Fe76Co8Nb1B6 ribbon prepared at a wheel velocity of 15.0 m/s were crystallized by heat-treatment, and the optimum heat-treatment condition was found to be at 700°C for 0 min, then the value of (BH)max was 146.2kJ/m3. The temperature coefficients of Jr and HcJ for the ribbons crystallized from the amorphous Pr9Fe76Co8Nb1B6 alloy were α(Jr)=-0.05%/°C (reversible) and α(HcJ)=-0.45%/°C (irreversible), respectively. The value of (BH)max for the compression molding Pr9Fe76Co8Nb1B6 isotropic bonded magnet prepared by using the ribbons annealed at 700°C for 0 min is 84.5kJ/m3 and the density is 6.1Mg/m3.
著者関連情報
© 電気学会
前の記事 次の記事
feedback
Top