Output Current Ripple Reduction of LED Driver Using Ceramic-Capacitor-Input Circuit and Buck-Boost Converter

Abstract

This paper proposes an LED driver that consists of a ceramic-capacitor-input rectifier and a buck-boost converter. The LED driver has an advantage of long-life because it does not contain any electrolytic capacitors. However, the issue with electrolytic capacitor-less LED driver is that the ripple of the smoothed voltage becomes large due to insufficient capacitance of the smoothing capacitor. The proposed method, which uses the discontinuous current mode of a buck-boost converter, reduces the output current ripple under such conditions. Experimental results using a 5.7W LED driver prototype demonstrate that the proposed method reduces the output current ripple and that the percent flicker becomes 4.4%, which is smaller than the recommended upper limit of 8%.