This paper discusses operation characteristics of discontinuous current mode (DCM) for an ac-dc isolated converter for on-board battery chargers of electric vehicles. The converter discussed in this paper consists of a front-end diode-bridge rectifier, an active energy buffer, and a dual-active-bridge dc-dc converter. The energy buffer circuit absorbs the power pulsation form the single-phase ac line into a small-rated capacitor, and thus, makes it possible to reduce a required capacitance of the dc-link capacitor. This paper explains details of the DCM control method including a technique of the ripple cancel of the inductor current, to realize the power factor correction of the line current and the voltage control of the buffer capacitor at the same time without complex calculations. Then, a reference value of the inductor current and an operation range of the dc-output voltage are discussed. Experimental results obtained by a 220-V, 6.6-kW experimental setup demonstrate a sinusoidal-line current and a controlled buffer capacitor voltage as well as a smoothed dc-output current.
J-STAGEがリニューアルされました！https://www.jstage.jst.go.jp/browse/-char/ja/
