2020 Volume 9 Issue 4 Pages 435-443
With the sharp increase in the global energy demands, photovoltaics (PV) have been developed significantly in recent years. However, when the PV work under partial shading conditions, the global maximum power point tracking control should be executed. In this paper, a novel particle swarm optimization (PSO) algorithm with the particle jump improvement is proposed to track the global maximum (GM) of PV output power under partial shading conditions. In the proposed method, each particle is allocated within respective intervals at initial iteration suh that the particle only explores the corresponding interval to determine the potential GM. When the corresponding interval has been traversed without determining the GM, the interval will be discarded and the particle will jump to the interval where the current tracked GM is present. Therefore, each interval of the converter duty range will be traversed by only one particle and the total algorithm tracking time will be reduced. The proposed algorithm is verified with a simulation and an experiment. Based on the experimental results, the tracking times of the proposed method are 0.8s, 0.8s, and 1.2s when the PV output power possesses 2, 3, and 4 peaks under partial shading conditions, respectively.