抄録
High frequency model of transformer winding is used to analyze the voltage oscillations due to various excitations such as the very fast transient overvoltage which occurs at the time of disconnecting switch operations. Usually, a circuit of interlinked inductances and capacitances is used for this purpose, in which circuit parameters have to be properly determined. Those constants have been hitherto estimated taking the coil section pair as a unit. In the method proposed here, the section pair can be further subdivided. The time-domain calculation is conducted combining the frequency analysis and FFT technique. The voltage oscillations of the winding subjected to the lightning impulse are calculated. The correspondence with the experimental results is satisfactory. The response to a chopped impulse shows this method's applicability to high frequency analysis. Since the constants are calculated directly from the design parameters of transformer winding, this technique is particularly useful in developing and designing transformers.
