超電導磁気エネルギー貯蔵用電磁力平衡コイルの実証モデル開発

抄録

In large-scale SMES, the superconducting coils require special considerations for induced electromagnetic forces to limit allowable tensile stress. Force-balanced coil (FBC) is a helically wound hybrid coil of toroidal field coils and a solenoid. The FBC can significantly reduce the required mass of the structure for induced electromagnetic forces. In order to demonstrate the feasibility of the FBC concept for SMES, the authors have developed a superconducting model coil. The outer diameter of the model FBC is 0.53m. The hand-made winding, using NbTi/Cu composite strands with a diameter of 1.17mm, was finished with 10584 poloidal turns after four months. The helical windings of the model FBC were neither impregnated with epoxy resin nor reinforced with stainless steel wires. Three test runs were conducted with liquid helium cooling at intervals of several months. The number of quench tests was 81 in total. The first quench current was 293A, which was 53% of the critical coil current. The training phenomena could be observed even after the coil was warmed up to room temperature. After successive quenches the quench current was improved to 476A, corresponding to 86% of the critical coil current, and it was successfully excited up to 6.1T.