電磁操作方式真空遮断器の機構CBM機能の開発

抄録

A new mechanical CBM (Condition Based Maintenance) system for an electromagnetically actuated vacuum circuit breaker (VCB) has been developed. This CBM function has a new monitoring method using analysis of the coil current profile of the actuator operation. The VCB has three sets of vacuum interrupters, insulating rods, contact pressure springs and electromagnetic actuators. The electromagnetic actuators control each phase independently. We have clarified the variation in the actuator's current profile by the developed analytical method when the value of friction, contact erosion and driving capacitance changes. We have established a diagnostic method for the mechanical condition using this current profile analysis. With this method, a new remote monitoring system of the mechanical condition using current monitors on the actuator's controller has been developed and mounted on VCB for cubicle type gas insulated switchgears rating from 7.2kV to 84kV. The maintenance for mechanical parts of VCB changes to the CBM system from the conventional TBM (Time Based Maintenance) system using this monitoring system. The developed mechanical CBM system significantly reduces the life cycle cost including the labor cost of maintenance.