Determine Non-Passenger Data from WiFi Scanner Data (MAC Address), A Case Study: Romango Bus, Obuse, Nagano Prefecture, Japan

抄録

WiFi is one of the most useful technologies that can be used for detecting and counting MAC addresses. Many previous studies have interpreted MAC address data into other forms for use in infrastructure development and urban transport. This study uses onboard WiFi scanners, circulated on the "Romango Bus", a hop-on-hop-off bus that has nine bus stops with roaming time from 09.50 to 17.50. The method uses WiFi and GPS MAC addresses as raw data from WiFi devices, collected during the time the bus goes around the route. WiFi scanner devices are placed on two different buses for comprehensive monitoring of the route's operating hours. Raw data obtained in the form of WiFi data and GPS data is combined and processed through five steps to produce non-passenger data. The results are displayed on a map that contains MAC address data, and that specifies non-passenger data categorized into pedestrians, vehicles, and buildings. Obuse is a tourist area that has many tourist attractions, and the results of WiFi at stopover locations shows a high number of pedestrians, especially at Obuse Park and Obuse Station.