Effect of Welding Passes on Heat Affected Zone and Tensile Properties of AISI 304 Stainless Steel and Chrome-Manganese Austenitic Stainless Steel

Ravindra V. Taiwade; Awanikumar P. Patil; Ravindra D. Ghugal; Suhas J. Patre; Ravin K. Dayal

doi:10.2355/isijinternational.53.102

Regular Article

Effect of Welding Passes on Heat Affected Zone and Tensile Properties of AISI 304 Stainless Steel and Chrome-Manganese Austenitic Stainless Steel

Ravindra V. Taiwade, Awanikumar P. Patil, Ravindra D. Ghugal, Suhas J. Patre, Ravin K. Dayal

著者情報

キーワード: AISI 304 stainless steel, chrome-manganese austenitic stainless steel, shielded metal arc welding, heat affected zone, fractography, electron probe micro analysis

ジャーナルオープンアクセス

2013 年 53 巻 1 号 p. 102-109

DOI https://doi.org/10.2355/isijinternational.53.102

詳細

抄録

This paper aims at a systematic comparison of effect of single, double and triple pass welding on heat affected zone and tensile strength of AISI 304 stainless steel and chrome-manganese austenitic stainless steel. Degree of sensitization (DOS) increased with increase in number of passes and highest DOS (35.53%) was obtained for triple pass welding of chrome-manganese austenitic stainless steel. The decrease in tensile strength is relatively more in chrome-manganese austenitic stainless steel as compared to AISI 304 SS. The mode of failure for AISI 304 SS was ductile fracture, whereas chrome-manganese austenitic stainless steel failed due to intergranular brittle fracture.

責任著者(Corresponding author)

J-STAGEへの登録はこちら（無料）