Volumetric Shrinkage Characteristics and Kinetics Analysis of Vanadium Titanomagnetite Carbon Composite Hot Briquette during Isothermal Reduction

抄録

The volumetric shrinking characteristics and kinetics of vanadium titanomagnetite carbon composite hot briquette (VTM-CCB) during isothermal reduction were investigated in this paper. It was found that the volumetric shrinking occurs as a combination of a loss of carbon and oxygen from VTM-CCB as well as sintering of iron oxide, suppression of growth of iron whiskers, formation of molten phases, and residual solid carbon content. In the temperature range from 900°C to 1100°C, the carbon gasification is viewed as the primary factor for the shrinking behavior. In the temperature range higher than 1100°C, the shrinking of VTM-CCB is mainly caused by the formation of molten slag, liquid iron, and residual solid carbon. It also should be pointed out that, in the higher temperature range, the volumetric shrinkage of VTM-CCB decreased with increasing FC/O ratio, which is mainly due to the fact that a higher FC/O ratio leads to a decreasing of molten slag generation proportion and a suppression of aggregation growth of liquid iron by the increasing of residual solid carbon. Based on the kinetics analysis, The formula for the shrinkage of VTM-CCB during reduction can be obtained, and the value of shrinking activation energy of VTM-CCB decreased obviously from 337.86 kJ/mol to 84.85 kJ/mol with increasing FC/O ratio from 0.8 to 1.4.