Joint Trajectory Planning Based on Minimum Euclidean Distance of Joint Angles of a Seven-Degrees-of-Freedom Manipulator for a Sequential Reaching Task

抄録

When a nuclear power disaster occurs at a nuclear power plant, it is hazardous for humans to enter the plant. If robots could remove radioactive substances adhering to a plane such as a plant wall, humans would be able to enter the plant to investigate the situation and to work. In this study, to efficiently remove radioactive substances from a wall with a manipulator, we examined joint trajectory planning based on the minimum Euclidean distance of joint angles of a seven-degrees-of-freedom (7-DOF) serial link manipulator for a sequential reaching task on a plane. We demonstrate the planning for the sequential reaching task, which is an iterative point-to-point reaching movement between positions on a plane. The joint angles for each target position were obtained based on the inverse kinematics for an arm angle, and the optimal arm angles within the constraints of the joint angles were computed by the sequential quadratic programming method. The optimal trajectories for the arm angles were compared with the trajectories of the joint angles that were the eight inverse kinematic solutions for a fixed arm angle. The result showed that through optimal planning, an efficient trajectory within the movable ranges of the joint angles could be obtained for the sequential reaching task.