石油技術協会誌
Online ISSN : 1881-4131
Print ISSN : 0370-9868
ISSN-L : 0370-9868
講演
Aquifer CCS操業における排水井の効用について
森田 信男
著者情報
ジャーナル フリー

2025 年 90 巻 5 号 p. 382-396

詳細
抄録

In aquifer CCS(Carbon Capture and Storage), it is common to have only CO2 injection wells installed. In the North Sea operations, the geological setting consists of normal fault zones, which makes the formations stable, and even if the reservoir pore pressure increases to the level of the minimum horizontal stress, the formation does not become unstable. On the other hand, Japan is located in a strike-slip fault zone, so if the pore pressure increases by more than 2000 kPa, the formation may become unstable.

If CO2 is injected into such a reservoir using only injection wells, the supercritical CO2, which is miscible with water, will spread in a piston-like manner around the wellbore without sweeping a wide area. Meanwhile, the formation water being displaced has a low compressibility, which increases the pressure over a wide area. As a result, the combined compressibility of the rock pore volume(3 × 10-6 1/psi)and water(3 × 10-6 1/psi)is approximately 0.6 × 10-5 1/psi. Assuming an upper pressure limit of about 300 psi, only about 0.2 % of the pore volume can be injected.

On the other hand, Japan’s CO2 emissions amount to 800 million to 1 billion tons per year. The Ministry of Economy, Trade and Industry has declared a goal to reduce greenhouse gas emissions by 46 % from 2013 levels by fiscal year 2030(Masashi Sasayama, 2025). However, in order to achieve this, large-scale CCS projects will be essential. Unless at least a few percent of Japan’s CO2 emissions are handled through aquifer CCS, it may not be regarded as an effective means of CO2 disposal.

This presentation proposes a path forward to establish aquifer CCS as a credible and effective CO2 disposal method.

著者関連情報
© 2025 石油技術協会
前の記事 次の記事
feedback
Top