JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
Online ISSN : 1881-1299
Print ISSN : 0021-9592
Particle Engineering
Flowability Measurement of Coarse Particles Using Vibrating Tube Method
Katsunori IshiiMasahiro SuzukiTakuma YamamotoYoshiyuki KiharaYoshiyuki KatoTsutomu KuritaKatsunobu YoshimotoMasatoshi YasudaShuji Matsusaka
著者情報
ジャーナル 認証あり

2009 年 42 巻 5 号 p. 319-324

詳細
抄録
The flowability of coarse particles has been experimentally investigated using the vibrating tube method, to evaluate the applicability of this method to MOX (mixed oxide of PuO2 and UO2) particles which are nuclear fuel used for electric power production. Five sizes of non-radioactive model particles, smaller than 850 μm, made of ZrO2 were prepared, and the experiments were carried out using vibrating tubes with an outlet diameter from 2 to 4 mm. The outlet diameter significantly affected the flowability measurements. When using the tube with a 4-mm-outlet diameter, the flowability of all the model particles was successfully measured. The inclination angle of the tube also affected the flowability measurements. The critical vibration acceleration to make the particles flow, which was a factor for evaluating the flowability, was correlated with Carr’s flowability index. Because of the advantages of high sensitivity, short measurement time, simple structure, and easy operation, the vibrating tube method is expected to be applied to the remote flowability measurement of the MOX particles.
著者関連情報
© 2009 The Society of Chemical Engineers, Japan
前の記事 次の記事
feedback
Top