Synthesis of tantalum carbide nanoparticles via a simple reductive reaction

Kailong Zhang; Luanhui Wu; Chao Zhang; Qidong Yang; Wei Qian; Guang Hu; Weiwei Hu; Yazhou Kong; Liangbiao Wang; Gaoran Li

doi:10.2109/jcersj2.22125

Note

Synthesis of tantalum carbide nanoparticles via a simple reductive reaction

Kailong Zhang, Luanhui Wu, Chao Zhang, Qidong Yang, Wei Qian, Guang Hu, Weiwei Hu, Yazhou Kong, Liangbiao Wang, Gaoran Li

著者情報

Kailong Zhang
Key Laboratory for Palygorskite Science and Applied Technology of Jiangsu, National & Local Joint Engineering Research Center for Mineral Salt Deep Utilization, School of Chemical Engineering, Huaiyin Institute of Technology
Henan Newvid Technology Co., Ltd.
Hefei National Laboratory for Physical Sciences at the Microscale, University of Science and Technology of China
Luanhui Wu
Key Laboratory for Palygorskite Science and Applied Technology of Jiangsu, National & Local Joint Engineering Research Center for Mineral Salt Deep Utilization, School of Chemical Engineering, Huaiyin Institute of Technology
Chao Zhang
Key Laboratory for Palygorskite Science and Applied Technology of Jiangsu, National & Local Joint Engineering Research Center for Mineral Salt Deep Utilization, School of Chemical Engineering, Huaiyin Institute of Technology
Qidong Yang
Key Laboratory for Palygorskite Science and Applied Technology of Jiangsu, National & Local Joint Engineering Research Center for Mineral Salt Deep Utilization, School of Chemical Engineering, Huaiyin Institute of Technology
Wei Qian
Key Laboratory for Palygorskite Science and Applied Technology of Jiangsu, National & Local Joint Engineering Research Center for Mineral Salt Deep Utilization, School of Chemical Engineering, Huaiyin Institute of Technology
Guang Hu
Key Laboratory for Palygorskite Science and Applied Technology of Jiangsu, National & Local Joint Engineering Research Center for Mineral Salt Deep Utilization, School of Chemical Engineering, Huaiyin Institute of Technology
Weiwei Hu
Key Laboratory for Palygorskite Science and Applied Technology of Jiangsu, National & Local Joint Engineering Research Center for Mineral Salt Deep Utilization, School of Chemical Engineering, Huaiyin Institute of Technology
Yazhou Kong
Key Laboratory for Palygorskite Science and Applied Technology of Jiangsu, National & Local Joint Engineering Research Center for Mineral Salt Deep Utilization, School of Chemical Engineering, Huaiyin Institute of Technology
Liangbiao Wang
Jiangsu Key Laboratory of Precious Metals Chemistry and Engineering, School of Chemistry and Environment Engineering, Jiangsu University of Technology
Gaoran Li
School of Materials Science and Engineering, Nanjing University of Science and Technology

キーワード: Chemical synthesis, Tantalum carbide, X-ray method, TGA

ジャーナルフリー

2023 年 131 巻 2 号 p. 27-30

DOI https://doi.org/10.2109/jcersj2.22125

詳細

抄録

Usually, the synthetic process of tantalum carbide (TaC) by using tantalum dioxide as tantalum source require high reaction temperature (above 1300 °C). In this study, TaC nanoparticles have been synthesized in large scale through a one-step autoclave route by the reaction of tantalum pentoxide, tin oxalate and metallic lithium at 700 °C. The X-ray powder diffraction pattern reveals the obtained product was cubic TaC with lattice constant of a = 4.439 Å. Scanning electron microscope images show the obtained TaC product are composed of particles with an average size of about 50 nm. Furthermore, the oxidation resistance of the obtained TaC has been investigated.

責任著者(Corresponding author)

J-STAGEへの登録はこちら（無料）