Investigation on Joining of AlN Ceramics ——Effects of TiH<sub>2</sub> Coating and Insertion of Ti and Cu Foils——

Ayako KAI; Hiroki HIRATA; Toshikatsu MIKI

doi:10.14852/jcersjsuppl.112.0.S117.0

Journal of the Ceramic Society of Japan, Supplement 112-1, PacRim5 Special Issue

セッションID: 1

DOI https://doi.org/10.14852/jcersjsuppl.112.0.S117.0

会議情報

主催: The Ceramic Society of Japan

共催: Iketani Science and Technology Foundation, International Ceramic Federation, Commemorative Organization for the Japan World Exposition '70, The American Ceramic Society, The Australasian Ceramic Society, The Chinese Ceramic Society, The Korean Ceramic Society, Joint Research Consortium of Synergy Ceramics/Fine Ceramics Research Association, Nanotechnology Researchers Network Center of Japan, The Special Coordination Funds for Promoting Science and Technology, Japan National Tourist Organization, Aichi Prefectural Government, CASIO SCIENCE PROMOTION FOUNDATION, DAIKO FOUNDATION, Nagoya Convention and Visitors Bureau, The Asahi Glass Foundation, The Kao Foundation For Arts And Sciences, The Murata Science Foundation, The Ogasawara Foundation for the Promotion of Science & Engineering, ASAHI GLASS CO., LTD. Research Center, CENTRAL GLASS CO., LTD., ELECTRIC GLASS INDUSTRY ASSOCIATION OF JAPAN (EGAJ), Hattori Company, Ltd., Hitachi Research Laboratory, Hitachi, Ltd., HOYA CORPORATION, INAX Corporation, ITOCHU CERATECH CORP., Japan Cement Association, KYOCERA Corporation, KYUSHU REFRACTORIES CO., LTD., MINO CERAMIC CO., LTD., Murata Manufacturing Co., Ltd., NGK INSULATORS LTD., NGK SPARK PLUG CO., LTD., NICHIAS Corporation, NIKKO COMPANY, Nippon Electric Glass Co., Ltd., Nippon Sheet Glass Co., Ltd., NORITAKE CO., LIMITED, Tokuyama Corporation, TOTO LTD.

Notes

Investigation on Joining of AlN Ceramics

——Effects of TiH₂ Coating and Insertion of Ti and Cu Foils——

Ayako KAI, Hiroki HIRATA, Toshikatsu MIKI

著者情報

キーワード: AlN, TiH₂, Joining, SPS, Ti, Cu

会議録・要旨集フリー

詳細

抄録

We have conducted joining between AlN ceramics by spark plasma sintering (SPS) process and examined the effects of TiH₂ coating on AlN and the insertion of Ti and Cu foils. Titanium hydride was decomposed and a joint was formed by heating at 500°C for 10 min. The resultant reaction layer has a shear strength of 24.8 MPa. The interface layer was characterized using scanning electron microscope (SEM), electron-probe microanalyzer (EPMA) and x-ray diffraction (XRD).

責任著者(Corresponding author)

J-STAGEへの登録はこちら（無料）