材料と環境
Online ISSN : 1881-9664
Print ISSN : 0917-0480
ISSN-L : 0917-0480
小型丸棒試験片を用いる環境脆化割れ解析のための誘導波AE解析
竹本 幹男内田 福年佐藤 輝嘉水谷 義弘西野 秀郎山崎 真吾
著者情報
ジャーナル フリー

1999 年 48 巻 11 号 p. 733-738

詳細
抄録
With the aim of studying the kinetics and mechanism of environmental assisted cracking such as stress corrosion cracking and delayed fracture in small diameter rod specimens, we developed a new signal processing method of the guided waves monitored by resonant-type AE sensors mounted on the outer surface of the rod. Source location of AE events can be identified by utilizing the ratio A/S of the maximum amplitude A of zero-th order anti-symmetric mode to the peak amplitude S of the first zero-th order symmetric mode waves. Here, the guided waves must be measured by four AE sensors mounted on the surface in 90° step at the same distance from the source. Fracture kinetics, limited to only the Mode-I fracture, were estimated by the So-packet waveform simulation by utilizing the overall transfer function determined as a response to a small compression-mode PZT element excited by a pulse. This simulation method, though needs some special techniques and depends on the frequency of the element, enables us to estimate the fracture kinetics with source rise time less than 1μs. The proposed method was adopted to tetrathionic SCC of sensitized SUS304 stainless steel rod, and revealed that fast cleavage-type fractures with rise time of 0.4μs to 2.5μs occurred during the SCC progression.
著者関連情報
© 社団法人腐食防食協会
前の記事
feedback
Top