抄録
An electric pump composed of an MgB2 motor is combined with superconducting level sensors using thin CuNisheathed MgB2 wires to transfer liquid hydrogen. An impeller is attached to the lower end of a rotating shaft on the MgB2 motor and covered with an outer casing to form a centrifugal pump. Then, the MgB2 motor and impeller are placed vertically inside a cryostat with an infill of liquid hydrogen. A glass Dewar vessel is prepared to receive the liquid hydrogen transferred from the cryostat containing the MgB2 motor. The MgB2 sensors are used not only to detect the level of liquid hydrogen but also to control the electric pump on the basis of their pre-estimated calibration curves. By using the assembled pump system, the liquid hydrogen is successfully transferred from the cryostat to the glass Dewar vessel via a transfer tube. (Translation of the article originally published in Cryogenics 52 (2012) 615-619)
