低温工学
Online ISSN : 1880-0408
Print ISSN : 0389-2441
ISSN-L : 0389-2441
テーマ解説
ブロンズ法Nb3Sn線材における内部補強による機械特性の改善
―固溶強化機構による内部マトリックス補強―
菱沼 良光 菊池 章弘谷口 博康小黒 英俊淡路 智室賀 健夫
著者情報
ジャーナル フリー

2023 年 58 巻 3 号 p. 108-115

詳細
抄録

We approached the internal matrix reinforcements using the Cu-Sn-Zn and Cu-Sn-In ternary bronze alloy matrices. After Nb3Sn phase synthesis, these ternary bronze alloy matrices were transformed into(Cu, Zn)or(Cu, In)solid solutions having much higher mechanical strength. Jc degradation due to the transverse compressive stress on the internal matrix reinforced Nb3Sn multifilamentary wire was evaluated. No Jc degradation was observed at approximately 100 and 150 MPa, which values were much higher than the conventional bronze processed Nb3Sn wire. We found that the internal matrix reinforcement was effective for suppressing Jc degradation due to transverse compressive stress.

著者関連情報
© 2023 公益社団法人 低温工学・超電導学会 (旧 社団法人 低温工学協会)
前の記事 次の記事
feedback
Top