縦型高速双ロール鋳造材を出発材とするA356合金冷間圧延・溶体化材の組織と伸び異方性

抄録

  A356 alloy strips fabricated via high-speed twin-roll casting were cold rolled at the reductions of 0 %, 12 %, 30 %, 50 % and 73 % and then solution treated at 793 K for 1 h. Microstructure observations and tensile tests were performed for the processed strips. Upon increasing the reduction from 0 % to 50 %, an improvement in elongation with significant anisotropy was observed ; the elongation along the transverse direction was inferior to that in the rolling direction. However, on further reduction up to 73 %, this anisotropy was eliminated and an elongation above 20 % was achieved. This behavior is caused by the characteristic changes occurring in the second-phase particles that are located in the mid-thickness region of the strip. To achieve a high elongation without anisotropy, a process for refining the coarse particles in the mid-thickness region of the twin-roll-cast strips and homogeneously dispersing them into the matrix needs to be developed.