炭素鋼摩擦圧接部の温度分布の数値解析

抄録

The purpose of this study is to estimate temperature distribution in the vicinity of weld interface during a friction welding process involving an upset process. On the base of a simple model of friction heat input, a non-steady heat conduction analysis was carried out by finite element method. As a result from a comparison of the estimated temperature distribution with the experimental data, it turned out that the friction heat input model that allowed for the effects of temperature and linear velocity on the friction coefficient was appropriate. This heat input model could simulate adequately the change in friction heat input and temperature distribution in a friction welding process. As a result, the relationship between burn-off length and temperature distribution in upset process has been explained and also the relationship between temperature distribution and width of heat-affected zone has been obtained. This heat input model allows us to estimate temperature distribution in friction welding, from friction pressure, rotation speed and the thermal property of base metal, even where a friction-welding machine does not have a function of torque measurement.