混相流
Online ISSN : 1881-5790
Print ISSN : 0914-2843
ISSN-L : 0914-2843
[微小流路内の気泡・気液二相流]
扁平なマイクロ流路内水平気液二相流のホールドアップと流動様式
井手 英夫里中 健太郎深野 徹
著者情報
ジャーナル フリー

2011 年 24 巻 5 号 p. 611-618

詳細
抄録

Experiments were made to clarify the mean void fraction, the mean holdup, the velocity of liquid slug and the flow patterns of air-water two-phase flow in horizontal flat rectangular microchannels with the dimensions of the width and depths of 1.0 x 0.1 mm and 1.0 x 0.2 mm, respectively. The flow patterns of bubble flow, slug flow and annular flow were observed. These data in the microchannel showed relatively similar tendencies to that in the minichannels with the width of 1~10mm and the depth of 1mm which we had previously reported. In a channel of 1.0 x 0.1 mm, however, the mean holdup and the holdup which correspond to the base film thickness in annular flow gave larger values because the effects of liquid viscosity and surface tension on the holdup and void fraction became dominant. The remarkable flow characteristics of rivulet flow and the flow with partial dry out mainly on the upper channel wall were observed in slug flow and annular flow regions in the channel of 0.1 mm depth.

著者関連情報
© 2011 日本混相流学会
前の記事 次の記事
feedback
Top