抄録
This paper investigates wing aerodynamic characteristics used for bi-plane micro-air vehicles. Surface pressure distributions of two-dimensional biplane airfoils (4% cambered-plate airfoil) were measured at a chord Reynolds number of 6.4 × 104. Lift characteristics of three-dimensional biplane rectangular wings (aspect ratio of 3) were also measured at the same Reynolds number. It was indicated that the behaviors of laminar separation bubble formed both on the upper and lower airfoils/wings affects their lift characteristics. Bi-plane wings with positive stagger, i.e. protruded upper wing indicated higher maximum lift coefficient. This is caused by different behaviors of laminar separation bubble formed on the wing.
