Design and Fabrication of Additive Manufactured Violin (1st Report, Process Construction and Design Implementation)

Yukio YOKOYAMA; Akira MONKAWA; Takashi KIGURE; Satoshi OKUBO

doi:10.14953/jjsde.2022.2964

この記事には本公開記事があります。本公開記事を参照してください。
引用する場合も本公開記事を引用してください。

Design and Fabrication of Additive Manufactured Violin

(1st Report, Process Construction and Design Implementation)

Yukio YOKOYAMA, Akira MONKAWA, Takashi KIGURE, Satoshi OKUBO

著者情報

キーワード: tringed instrument, reverse engineering, simulation, 3D printing, 3D digitizing, CT scanning

ジャーナルフリー早期公開

論文ID: 2022.2964

DOI https://doi.org/10.14953/jjsde.2022.2964

この記事には本公開記事があります。

The final version of this article is now available: Vol. 58 (2023), No. 4 pp. 149-168

詳細

抄録

Additive manufacturing technology is being researched and developed not only for prototyping, but also for various application areas. The authors have been researching additive manufactured violins. In this study, four design goals for the additive manufactured violin were defined. Then, a process of design, manufacturing, and evaluation to achieve the design goals was constructed, employing 3D scanning, 3D-CAD, and CAE. Several parts of the constructed process were implemented to create 3D-CAD models of a violin. One of the design configurations for the additive manufactured violin was found that might achieve the four design goals using the 3D-CAD model.

責任著者(Corresponding author)

J-STAGEへの登録はこちら（無料）